Canon PIXMA MX392 Driver

Canon PIXMA MX392 Driver and Setup Download for Windows, MacOS, and Linux. This Printer is a qualified product of home printer. Taking into consideration about the need of basic paper printing and also colored record, this residence printer engine efficiency suffices. Equipped with low-middle engine specification, it cost less than an InkJet series. Although this is a printer produced basic usage, MX392 still has 4″ x 6″ Indeterminate picture. The good news is that there is ADF feature in Canon PIXMA MX392. This automated sheet feeder can aid customer that will print a record or thesis with a lot of pages.

Related Printer Driver: Canon MX394 Driver

OVERVIEWSPECIFICATIONSHOW TO INSTALLAPPLICABLE MODELS

Download Canon PIXMA MX392 Multifunction Printer Driver, User’s Manual and Software, Compatible Systems for Windows (64-Bit/32-Bit), MacOS, and Linux.

PIXMA MX392 Printer Specifications

Printer Category: Ink Jet
Type: All-In-One
Color or Monochrome: 1-pass color
Ink Jet Type: Photo All-Purpose
Connection Type: USB
Maximum Standard Paper Size: Legal
Number of Cartridges: 2
Number of Ink Colors: 4
Direct Printing from Cameras: No
LCD Preview Screen: No
Scanner Type: Flatbed with ADF (Standard or Optional)
Scanner Optical Resolution: 1200 pixels per inch
Print Duplexing: Manual with guidance
Maximum Scan Area: 8.5″ x 14″
Duplexing Scans: No
Standalone Copier and Fax: Copier, Fax

METHOD 1: Canon MX392 DRIVERS INSTALLATION – DOWNLOADED DRIVER SETUP FILE

For this method, you will not need an installation CD to install the driver of Canon PIXMA MX392 printers.

Things needed:

  1. A file of Canon PIXMA MX392 driver setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the PIXMA MX392 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon PIXMA MX392 driver using the setup file downloaded beforehand:

  1. Both your computer and the Canon MX392 Printer need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the PIXMA MX392 printer just yet. Wait until you are instructed otherwise.
  3. If you have not, download the Canon MX392 drivers setup file. Once done, install the file on your computer. Instructions given on the screen must be followed thoroughly for the file to install properly.
  4. Once installation completes, connect your computer to PIXMA MX392 Printer using the provided USB cable. Your computer should be able to detect the printers automatically. Once detected, more instructions are given.
  5. Displayed instructions should be followed thoroughly to complete the installation.
  6. Canon PIXMA MX392 should be ready for use by now.

METHOD 2: Canon PIXMA MX392 DRIVER INSTALLATION – MANUAL INSTALLATION

For this method, accessing your computer’s Windows’ “Add a printer” feature is required.

Things needed:

  1. A file of Canon MX392 drivers setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the MX392 printers. The cable should come with the package. Check your box for the cable.

Steps of manual installation of Canon PIXMA MX392:

  1. Both your computer and the Canon MX392 Printer need to be turned on first.
  2. You can connect your computer to your Canon PIXMA MX392 printers using the provided USB cable.
  3. Specify a location (folder) on your computer to extract the PIXMA MX392 setup file into. If you can’t find the file, try looking for it on the TEMP folder of your computer.
  4. For Windows 7 and Windows Vista users: open Control Panel, open View Devices & Printer. For Windows XP users: open Fax & Printers.
  5. Choose to Add a printer.
  6. The screen will pop up a window. Enter the location where you extract the setup file into previously.
  7. PIXMA MX392 Installation instructions will appear. Follow them all thoroughly to complete the installation.
  8. Once complete, your PIXMA MX392 Printer should be ready for use by now.

METHOD 3: Canon PIXMA MX392 DRIVER INSTALLATION – INSTALLATION CD

Things needed:

  1. A CD/DVD drive-fitted computer.
  2. An installation CD. This CD should come with the package and it contains a Canon MX392 setup files.
  3. A USB cable, used in connecting the computer to the MX392 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon MX392 driver setup file using an installation CD:

  1. Both your computer and the Canon PIXMA MX392 need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the Canon MX392 printer just yet. Wait until you are instructed otherwise.
  3. Place the installation CD inside the CD/DVD drive. The screen will display a setup wizard. Follow the given instructions thoroughly to begin the installation.
  4. You can now plug the USB cable into both your computer and Canon MX392 but only do so after the computer clearly specifies the process.
  5. Give it a time to allow connection to be made. Further instructions are given on-screen. Follow them all thoroughly.
  6. Upon completion of installation, your printer should be ready for use by now.
STEPS OF Canon PIXMA MX392 DRIVER AND SOFTWARE INSTALLATION ON MACOS

Things to pay attention to:

  1. The PIXMA MX392  driver setup file is needed. Download the file first and take note of where the file is stored upon completion of the download process. The folder where the file is stored can be inspected through the computer settings.
  2. Double-click on the downloaded setup file and mount the file on the Disk image.
  3. Double-click on that mounted Disk Image.
  4. Double-click on the packaged driver file. The Canon MX392 drivers installation will start automatically.
STEPS OF Canon MX392 DRIVER AND SOFTWARE INSTALLATION ON LINUX

Things needed:

  1. A computer running on Linux.
  2. A program named CUPS (Common Unix Printer Software), installed on that computer.

Guidelines:

  1. Start the computer and open the CUPS program.
  2. Access the web-based interface on the computer.
  3. Access the browser and access localhost: 631.
  4. Connect the computer to the printer using a USB cable.
  5. Locate the Administration tab in the browser. Choose the tab and choose Printers.
  6. Select Add Printer.
  7. Enter both your username and password.
  8. You should find your Canon MX392 Printer on the list displayed. Select the printer and select Continue.
  9. The CUPS program should detect and add the printer on its own.
  10. The screen pops up a window. Configure your preferred settings on this window. Enter values as needed.
  11. Your Canon PIXMA MX392 Printer should be ready for use by now.

Thank you.

How to Uninstall PIXMA MX392 Driver

  • The first step, Press Windows button, select “Control Panel” to on the Windows
  • Select Canon PIXMA MX392 Drivers or Software and Click on it “Uninstall a Program.”
  • Wait for it to the point your Canon MX392 Driver and Software successfully uninstalled, then push “Finish” button.
  • Canon MX390 Printer
  • Canon MX391 Printer
  • Canon MX392 Printer
  • Canon MX394 Printer
  • Canon MX395 Printer
  • Canon MX396 Printer
  • Canon MX397 Printer
Canon PIXMA MX392 Driver

Choose your Canon PIXMA MX392 Driver Printer below to access the latest downloads including full software, drivers, and User manual. Don’t Worry, The Download Links below for Canon MX392 Printer drivers is active.

Canon PIXMA MX392 Printer Driver Download

[Total: 1    Average: 5/5]